TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 282 of 596

TM 9-2815-205-34

(2) Oil pump assembly:

(a) Lubricate oil pump outer rotor (18) and

inner rotor (17) with engine oil and

place in pump housing (16).

(b) Place cover plate (15) on pump

housing (16). Align bolt holes and

drive screw holes with holes in pump

housing.

(c) Install cover plate (15) and two drive

screws (14) on pump housing (16).

f. Installation

(1) Place oil pump assembly (13) in rear of front cover (6) with markings "UP R.H." at top of front

cover.

NOT E

Models 5063-5392, 5063-5393, 5063-539F, and 5063-539L do not use Iockwashers (11).

(2)

(3)

(4)

Install six Iockwashers (11) and six

self-locking bolts (12) in oil pump

assembly (13) and front cover (6). Torque

bolts to 13-17 Ib-ft (18-23 NŽm).

Using gasket adhesive, install gasket (10)

on cylinder block (7).

Install oil seal expander (36) on crankshaft

(8).

Change 1

3-153