TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992
TM-9-2815-205-34

  TM-9-2815-205-34 - Page 324 of 596

TM 9-2815-205-34
3-50. PISTON AND CONNECTING ROD MAINTENANCE - TRUNK (MODELS 5063-5299,
5063-5395, AND 5063-5398) (Cont)
•
Ž
•
CAUTION
Distance from vertical center
line of connecting rod bolts to
edges of rod are not equal.
When installing piston and
connecting
rod
assembly,
ensure narrow side of two
adjoining connecting rods are
together to avoid cocking of
rod.
Do not damage or dislocate bearing shell when guiding end of connecting rod
assembly through block bore.
Do not damage preformed packings when sliding piston, connecting rod, and liner
assembly into block bore.
(5) Place piston, connecting rod, and liner assembly (27) in line with cylinder block bore. Align
identification number and letter on rod with outer edge of cylinder block and matchmarks on
liner. Guide connecting rod assembly (18) through block bore. Then slide piston, connecting
rod, and liner assembly straight into block bore until liner flange rests against block counterbore
(28).
3-194


Back to Top