TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992
TM-9-2815-205-34

  TM-9-2815-205-34 - Page 327 of 596

TM 9-2815-205-34
(5) Remove two nuts (5), cap (6), and lower bearing shell (7) from piston and connecting rod
assembly (8).
NOT E
Tag piston assembly with cylinder number for matching during reassembly.
(6) Push piston and connecting rod assembly (8) out through top of cylinder block (9).
NOT E
Always assemble cap with stamped number on same side as stamped on lower part of
connecting rod to ensure cap is not rotated 180 degrees.
(7) Assemble bearing cap (6), lower bearing shell (7), and two nuts (5) on piston and connecting
rod assembly (8).
(8) Repeat steps (2) thru (7) for remaining piston and connecting rod assemblies (8).
3-197


Back to Top