TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 382 of 596

TM9-2815-205-34

3-55. CYLINDER BLOCK MAINTENANCE (MODEL 5063-5398) (Cont)

NOT E

Install seven 5/8-1 1 x 3 1/2 inches long and nine 5/8-11 x 2 1/2 inches long bolts for two

blocking plates (49). Insert longer bolts at front and rear of each cylinder bank except at

right rear outboard position.

-

.

(5) Install large fabricated blocking plate (49), eight washers (50), and

each cylinder bank.

(6) Install small fabricated blocking plate (52) on right side, water hole

gaskets (7), and four self-locking bolts (5) on cylinder block.

eight bolts (51) on top of

cover (6) on left side, two

3-252