TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 381 of 596

TM 9-2815-205-34

e. Pressure test

(1)

(2)

(3)

(4)

NOT E

Ensure all water hole plugs are in cylinder block before pressure testing.

Install two preformed packings (42) in grooves at each cylinder bore position.

Apply shortening compound or antifreeze to inner surface of preformed packings (42).

(3) Slide cylinder liners (43) into block, being careful not to roll or damage preformed packings

Install three compression gaskets (44), four small seals (45), four large seals (46), four small

sleeves (47), and four large sleeves (48) on top surface of each cylinder bank.

3-251

(42).