TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 419 of 596

TM 9-2815-205-34

(4) Support pulley (1). Place a short 1/2 inch-diameter rod (16) on impeller end of shaft and

bearing assembly (10). Press shaft into pulley until distance from front face of pulley to top face

of pump housing is 5.60 inches.

(5) Install gasket (5), cover (4), and seven bolts (3) on coolant pump assembly (6). Torque bolts to

72-84 lb-in (8-9.5 N-m).

(6) If removed, install large pipe plug (7) and small pipe plug (8) in coolant pump assembly (6).

END OF TASK

3-289/(3-290 blank)