TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 418 of 596

TM 9-2815-205-34

3-63. COOLANT PUMP REPAIR

(2) Apply a light coat of sealing compound to outside of seal (11). Support pump housing (13) in

press, pulley side down. Place a 1 1/2 inch inside diameter sleeve (15) on outer flange of seal

and press seal into housing until flange contacts housing. Wipe face of seal with chamois

leather to remove dirt and metal particles.

CAUTION

Do not press top face of impeller beyond top face of pump housing. Pressing face of

impeller further than top of housing will push impeller into water seal and destroy seal.

(3) Support pulley end of shaft and press impeller (12) on shaft (2) until impeller is flush with top

face of pump housing (13).

3-288