TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 423 of 596

TM 9-2815-205-34

(2)

(3)

(4)

(5)

NOT E

Tag rocker arms, shafts, brack-

ets, valves, cam followers, and

associated hardware for instal-

lation in original location.

Remove six bolts (4) fastening rocker arm

shafts (5) and brackets (6) to cylinder

head. On models 5063-5392, 5063-5393,

5063-539F, and 5063-539L, remove

hold-down bracket (7) and hold-down

bracket (8) from intermediate brackets (6).

NOT E

On all except model 5063-

5299, one bracket (6) on right

cylinder head is also the throttle

delay housing (9).

Remove three rocker arm shafts (5) and

six brackets (6) from cylinder head.

For all except model 5063-5299: if

necessary, remove check valve (10), oil

supply plug (11), and strainer (12) from

throttle delay housing (9).

Swing left rocker arm (13), injector rocker

arm (14), and right rocker arm (15) away

from each injector. Remove injector clamp

screw (16), convex washer (17), and

clamp (18) from each injector.

(6) Remove three fuel injectors (2) from cylinder head.

(7) Loosen nine locknuts (19) at upper end of push rods (20) next to rocker arm clevis. Remove

nine rocker arms (13, 14, and 15) from push rods by unscrewing rocker arms.

Change 1

3-293