TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 455 of 596

TM 9-2815-205-34

(6) Injector holding pressure

(a) Place fuel injector in diesel fuel tester (37).

(b) Operate pump handle (39) until test

gage (44) pressure reaches 2200 PSI.

(c) Close fuel shut off valve. Start timing

when pressure reaches 2000 PSI and

stop at 1500 PSI. Minimum time is 5

seconds.

(d) If pressure drops in less than 5

seconds, check for leaks around

spray tip, preformed packing, and fuel

connectors.

(e) Pop fuel injector several times with

popping handle (38) until test gage

(44) shows no pressure to avoid fuel

spray when removing injector from

diesel fuel tester.

(7) Cover injector ports to prevent dirt from

entering injector.

END OF TASK

FOLLOW-ON MAINTENANCE

Para Description

3-64 Install injectors.

3-327