TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 458 of 596

TM 9-2815-205-34

3-66. BLOWER REPAIR (Cont)

(12)

(13)

(14)

(15)

(16)

(17)

(18)

CAUTION

Handle blower end plates, rotors, and blower housing with care during disassembly to

ensure no damage to mating surfaces,

Tap front end plate (6) off of dowel pins and away from blower housing (28) with a soft head

hammer. Remove end plate.

Withdraw right rotor (7) and left rotor (8) from front of blower housing (28).

On models 5063-5392, 5063-5393,

plate (30) to blower housing (28).

and 5063 -539L, remove two screws (29) retaining rear end

Tap rear end plate (30) off of dowel pins and away from blower housing (28) with a soft head

hammer. Remove end plate.

Remove two seals (31) from each end plate (6 and 30). Discard seals.

If necessa~, remove pipe plugs (32) from both front and rear end plates (6 and 30).

For models 5063-5392, 5063-5393, and 5063 -539L, remove bypass valve as follows:

3-330

Change 1