TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 464 of 596

TM 9-2815-205-34

3-66. BLOWER REPAIR (Cont)

(22) On models 5063-5392, 5063-5393, and 5063-539L, install bypass valve as follows:

(e)

(a)

(b)

(c)

(d)

If removed, tap tube (39) into top of rear end plate (30) until it bottoms out.

Install preformed packing (40) on bypass valve (36). Install valve in rear end plate (30).

Install hose (38) and two clamps (37) on bypass valve (36) and tube (39).

Install two clamps (35) [against bypass valve (36)], two Iockwashers (34), and two screws

(33) on rear end plate (30). Torque screws to 7-9 Ib-ft (10-12 N·m).

On models 5063-5392, 5063-5393, and 5063-539L, install two screws (29) on rear end plate

(30) into blower housing (28). Torque screws to 13-17 Ib-ft (18-23 N·m).

END OF TASK

FOLLOW-ON MAINTENANCE

Para Description

3-32 Install governor and blower assembly.

3-336

Change 1