TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 469 of 596

(16)

(17)

(18)

(19)

(20)

TM 9-2815-205-34

On models 5063-5392, 5063-5393, and 5063-539L, remove three socket head screws (28) and

thrust washer (29) from center housing (2). Discard thrust washer and screws.

Remove thrust spacer (30) with metal seal rings (31), and thrust collar (32) from backplate (25).

Remove two seal rings (31) from spacer (30). Discard seal rings.

On models 5063-5395, 5063-5398, and

5063-539F, remove thrust washer (33)

from center housing (2). Discard thrust

washer.

Remove bearing (34), bearing washer

(35), and retaining ring (36) from center

housing (2). Discard bearing, bearing

washer, and retaining ring.

Remove outer retaining ring (37), bearing

(38), and bearing washer (39) from

compressor end of center housing (2),

then remove inner retaining ring (37).

Discard retaining rings, bearing washer,

and bearing.

NOT USED ON MODELS: 5063-5392, 5063-5393 AND 5063-539L

Change 1

3-341