TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 477 of 596

TM 9-2815-205-34

(g)

(h)

(i)

(j)

(k)

Remove retaining ring (13), flat

washer (l4), an shouldered washer

f

15. Withdraw stop lever shaft 16)

rom bottom of cover (9).

If necessary, remove pin (17) from

stop lever shaft (16).

Remove special seal (18) from cover

(9). Discard seal.

If necessary, remove two tapered pins

(19) from bottom of cover (9).

If two bushings (20) require

(2)

repIacement, support governor cover

(9) on two wooden blocks in press

and press two bushings from cover

using bushing remover (21).

Governor spring pack

(a) Remove retainer (22), spring (23), and spring seat (24) from plunger (25).

(b) Remove nut (26) from screw (27).

NOT E

Retain original shims and special washers for assembly.

(c) Remove screw (27), packing nut (28), spring (29), shims (30), special washers (31), and pin

(32) from plunger (25).

3-349