TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 484 of 596

TM9-2815-205-34

3-68. GOVERNOR REPAIR (Cont)

(q)

(r)

(s)

(t)

(u)

(v)

(w)

Apply sealing compound around edge

of expansion plug (49) and tap

in

place in governor housing (36).

If removed, apply sealing compound

around edge of plug (65) and tap in

place in governor housing (36).

Install flat washer (51) and special

screw (50) against governor bearing

(52).

If removed, press pin (48) in

differential lever (47) until pin bottoms

out on shoulder.

Install differential lever (47) assembly

over pin (46). Install flat washer (45)

and retaining clip (44) against

assembly.

Place first flat washer (38 over

grooved pin (41). Pack roller bearings

(39) with grease and install roller

bearing and control link lever (40)

b

assem Iy, tapered end of link pin

holes down, over grooved pin. Place

second flat washer (38) over grooved

pin and install retaining clip (37).

Thread nut (33) on buffer screw (34).

Place spring (35) in buffer screw and

thread screw in side of governor

housing (36) until it extends 9/16-5/8

inch beyond housing.

END OF TASK

FOLLOW-ON MAINTENANCE

Para Description

3-32 Install governor to blower assembly.

3-31 Install governor cover and spring pack.

3-356