TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 491 of 596

TM 9-2815-205-34

Section Ill. ENGINE ADJUSTMENT.

Contents

Para

Page

Intervals And Adjustment Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3. . . 4-7

Engine Tune-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4. . . 4-8

4-3. INTERVALS AND ADJUSTMENT SEQUENCE

a. Intervals.

Following any engine repair, perform the adjustments specified in Para 4-3.b.

b. Adjustment Sequence.

Normally, when performing adjustments on an engine in service, check

various settings for possible changes from previous adjustments. However, if the cyIinder head,

governor, or fuel injectors have been removed or replaced, also check specific preliminary adjustments

before starting engine. The preliminary adjustments consist of the first four steps in the following

sequence. The remaining items complete the list of engine adjustments to be performed.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

Exhaust Valve Clearance (Cold Engine or Hot Engine)

Fuel Injector Timing Adjustment

Governor Gap Adjustment

Fuel Injector Control Tube Adjustment

Throttle Delay Adjustment

Starting Aid Screw Adjustment (internal Starting Aid Screw)

Maximum No-Load Speed Adjustment

Idle Speed Adjustment

Buffer Screw Adjustment

4-7