TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 115 of 968

TM 9-2815-210-34-2-2

FRAME 71

1.

2.

3.

NOTE

Readings must be within limits given in table 4-18.

Main bearings (1) are called by numbers one to seven

counting from front to rear of crankcase (2).

Measure inside diameter of number one main bearing (1). Note this

measurement.

Subtract measurement of crankshaft number one main bearing journal diameter

noted in step 3 of frame 20 from measurement taken in step 1 of this frame.

This is oil clearance between number one main bearing and journal. Note this

measurement.

Do steps 1 and 2 again for number two through number seven main bearings (1)

GO TO FRAME 72

4-96