TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 112 of 968

TM 9-2815-210-34-2-2

FRAME 69

1.

2.

3.

NOTE

Main bearings (1) are called by numbers one to seven

counting from front to rear of crankcase (2).

Readings must be within limits given in table 4-17.

Measure inside diameter of number one main bearing (1). Note this measurement

Subtract measurement of crankshaft number one main bearing journal

diameter noted in step 3 of frame 20 from measurement taken in step 1 of this

frame. This is oil clearance between number one main bearing (1) and

journal.

Note this measurement.

Do steps 1 and 2 again for number two through number seven main bearings

(1) .

GO TO FRAME 70

4-93