TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 111 of 968

TM 9-2815-210-34-2-2

FRAME

68

NOTE

Four different crankshafts (1) can be used in these

engines.

They differ in the diameters of the main

bearing journals and connecting rod journals. The

four crankshafts are early model standard size, late

model standard size, 0.0100-inch undersize, and

0.0200-inch undersize.

Size of crankshaft (1) you are now working on was

noted in frame 31.

1.

Check size of crankshaft (1) noted in frame 31.

IF WORKING ON STANDARD SIZE CRANKSHAFT, GO TO FRAME 69.

IF WORKING ON 0.100-INCH UNDERSIZE CRANKSHAFT, GO TO FRAME 71.

IF WORKING ON 0.0200-INCH UNDERSIZE CRANKSHAFT, GO TO FRAME 73

4-92