TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 22 of 968
TM 9-2815-210-34-2-2
SUPPLIES:
Croucus cloth
(cont)
Lubricating oil, ICE, OE/HDO 10, MIL-L-2104
Compressed air source, 30 psi max
Prussian blue, MIL-P-30501
Sealing compound, type II, MIL-S-45180
Clean lint-free cloth
Copper tube stock
Flexible non-metallic tube stock
Oil gage rod preformed packing
Oil drain plug gaskets (2)
Oil pump pressure relief valve shims
Penetrant kit, MIL-I-25135
Magnifying glass
Breather tube adapter gasket
Breather valve spring
Breather diaphragm assembly (2)
Oil filter post gasket
Oil cooler and filter housing gaskets (2)
Fuel filter body gaskets (2)
Fuel filter relief valve preformed packing
Fuel filter element
Plastic tube stock
Hydraulic pump preformed packing
Hydraulic pump manifold gasket
Hydraulic pump adapter gasket
Silicone lubricant, MIL-L-25681
Carbon removing solvent, MIL-C-25107
Thermostat seal
Copper tube, 2 feet long
Teflon tape
Cylinder head water manifold hoses (4)
Exhaust manifold seal rings (6)
Turbocharger exhaust elbow gasket
Cotter pins (as req’d)
Hydraulic pump oil reservoir gasket
Hydraulic pump oil reservoir preformed packing
Hydraulic pump oil reservoir body gasket
Hydraulic pump oil reservoir filter element
Diesel fuel, VV-F-800
Flame heater pipe plugs (2)
Flame heater fuel line filter
Timing gear cover seal
Wood V-blocks (2)
PERSONNEL: Two
EQUIPMENT CONDITION: Engine disassembled.
4-3
Back to Top
