TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 31 of 968
TM 9-2815-210-34-2-2
FRAME 3
1.
2.
WARNING
Dry cleaning solvent is flammable. Do not use near an
open flame.
Keep a fire extinguisher nearby when sol-
vent is used.
Use only in well-ventilated places. Fail-
ure to do this may result in injury to personnel and
damage to equipment.
Clean six piston cooling nozzles (1) and six nozzle mounting screws (2) with
dry cleaning solvent.
WARNING
Eye shields must be worn when using compressed air.
Eye injury can occur if eye shields are not used.
Clean oil passages in six piston cooling nozzles (1) using brass wire probes.
Blow compressed air through oil passages.
GO TO FRAME 4
4-12
Back to Top
