TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 38 of 968
TM 9-2815-210-34-2-2
FRAME 3
1.
2.
3.
Measure diameter of bore (1) in front main bearing cap (2). Write down
this measurement.
NOTE
New oil pump idler gear shaft (3) is different from early
model oil pump idler gear shaft (4). New oil pump idler
gear shaft has a shoulder (5) as shown.
Measure diameter of new oil pump idler gear shaft (3).
Fit of new oil pump idler gear shaft (3) in bore of front main bearing cap
(2) must be 0.001 to 0.0025 inch.
GO TO FRAME 4
4-19
Back to Top
