TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 42 of 968
TM 9-2815-210-34-2-2
FRAME 7
1.
2.
3.
4.
WARNING
Dry cleaning solvent is flammable. Do not use near an
open flame.
Keep a fire extinguisher nearby when sol-
vent is used.
Use only in well-ventilated places. Fail-
ure to do this may result in injury to personnel and
damage to equipment.
Check that dowel pins (1) have no nicks, scratches or burrs. Fix minor
burrs with a fine mill file or crocus cloth dipped in cleaning solvent.
Check that dowel pins (1) are not cracked, broken or loose.
If either of two dowel pins (1) is cracked, broken or loose, pull it out using
dowel pin puller.
Using soft-faced hammer, tap in new dowel pin (1) until dowel pin bottoms
in hole.
GO TO FRAME 8
4-23
Back to Top
