TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 34 of 968
TM 9-2815-210-34-2-2
FRAME 6
1.
CAUTION
Cylinder sleeves (1) are made of thin metal. They are
easy to break and scratch. Never scrape off carbon de-
posits using a tool with sharp corners.
Do this frame only for
reuse.
If no cylinder
go to frame 7.
NOTE
cylinder sleeves (1) marked for
sleeves were marked for reuse,
Clean carbon deposits off cylinder sleeves (1) after they are out of crank-
case (2).
WARNING
Dry cleaning solvent is flammable. Do not use near an
open flame.
Keep a fire extinguisher nearby when sol-
vent is used.
Use only in well-ventilated places. Fail-
ure to do this may result in injury to personnel and
damage to equipment.
Clean cylinder sleeves (1) with dry cleaning solvent. Dry with clean cloth.
2.
GO TO FRAME 7
4-15
Back to Top
