TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 26 of 968
TM 9-2815-210-34-2-2
b. Removal of Expansion Plugs and Crankcase to Cylinder Head Studs.
FRAME 1
NOTE
Take out only expansion plugs (1) which were marked
for removal.
This task is shown for one expansion plug (1). This
task is the same for all expansion plugs marked for
removal.
1.
Drill a hole in center of expansion plug (1) marked for removal.
2.
Using prybar, take out and throw away expansion plug (1).
GO TO FRAME 2
4-7
Back to Top
