TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 23 of 968
TM 9-2815-210-34-2-2
4-6. CRANKCASE ASSEMBLY, CRANKSHAFT, AND CAMSHAFT.
a .
Removal of Pipe Plugs and Inspection of Expansion Plugs.
FRAME 1
1.
Take out five pipe plugs (1).
NOTE
Coolant leakage around expansion plugs (2) will show
up as rust, scale or stain on side of crankcase (3)
below plug.
2.
Check that three expansion plugs (2) are not damaged and that there are
no signs of coolant leakage. Mark damaged or leaking plugs for removal.
GO TO FRAME 2
4-4
Back to Top
