TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 30 of 968
TM 9-2815-210-34-2-2
FRAME 2
WARNING
Dry cleaning solvent is flammable. Do not use near an
open flame. Keep a fire extinguisher nearby when sol-
vent is used. Use only in well-ventilated dates. Fail-
ure to do this may result in injury
damage to equipment.
CAUTION
It is easy to damage the equipment
to personnel and
if you do not know
1.
what you are doing.
Do not try to do
-
this task unless
you are experienced at it, or you have an experienced
person with you.
Clean 14 main bearing halves (1), seven main bearing caps (2), 14 screws (3),
and 14 washers (4) with dry cleaning solvent. Use stiff bristle brush or wood-
en scraper to clean off sludge and gum in bearing grooves and oil holes. Dry
with clean cloth.
GO TO FRAME 3
4-11
Back to Top
