TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 35 of 968
TM 9-2815-210-34-2-2
FRAME 7
1.
2.
3.
WARNING
Dry cleaning solvent is flammable. Do not use near an
open flame.
Keep a fire extinguisher nearby when sol-
vent is used.
Use only in well-ventilated places. Fail-
ure to do this may result in injury to personnel and
damage to equipment.
Clean 12 valve tappets (1) in dry cleaning solvent. Clean off sludge and gum
with stiff brush.
WARNING
Eye shields must be worn when using compressed air.
Eye injury can occur if eye shields are not used.
Clean oil passage (2) using fuel passage cleaning brush. Flush with dry
cleaning solvent.
Blow oil passage dry with compressed air.
Dry out side of 12 valve tappets (1) with clean cloth.
END OF TASK
4-16
Back to Top
