TM-9-2910-226-34
PUMP, FUEL, METERING AND DISTRIBUTING, ASSEMBLY
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS
JUNE 1974
TM-9-2910-226-34 - Page 87 of 208
TM 9-2910-226-34
(10) Refer to figure 3-62. Remove operating
shaft (E), operating-shaft spring (B), and shaft
spring plate (C) from bearing (A). See note. Remove
and discard operating shaft preformed packing (D).
NOTE
If a code G pump operating shaft does not
have a retaining ring groove, discard the
shaft and replace with a new shaft at
assembly.
Figure 3-61. Removing operating shaft bearing and associated
parts (all pumps except code A).
Figure 3-62. Disassembling operating shaft bearing and associated parts (all pumps except code A).
3-41
Back to Top
