TM-9-2910-226-34
PUMP, FUEL, METERING AND DISTRIBUTING, ASSEMBLY
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS
JUNE 1974
TM-9-2910-226-34 - Page 90 of 208
TM 9-2910-226-34
Figure 3-65. Removing or installing torque link assembly in
governor housing (code A pumps).
(14) Refer to figure 3-66. Remove two lock pins
(A) and two outside washers (B). Separate operating
shaft assembly (D) from torque link assembly (C).
Remove two inside washers (B) from pins (E).
Remove and discard operating shaft packing (F).
Remove fuel limiting stop from torque link by
removing cotter pin (G), outside flat washer (H),
stop (J), inside flat washer (H) and spring washer
(K).
Figure 3-66. Disassembling or assembling of torque link assembly
(code A pumps).
3-44
Back to Top
