TM-9-2910-226-34
PUMP, FUEL, METERING AND DISTRIBUTING, ASSEMBLY
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS
JUNE 1974
TM-9-2910-226-34 - Page 91 of 208
NOTE
Refer to
paragraph (15) below for
disassembly instructions on the fulcrum
lever used on code A, B, C, D, E and F
pumps. Refer to paragraph (16) below for
instructions on the code G pumps.
(15) Refer to figure 3-67. Remove self-locking
TM 9-2910-226-34
nut (A) and fuel control rod (B). Remove flat washer
(C) and spring (D). Remove hex nut (E), lock washer
(F), control rod pin screw (G), smoke limit cam (H)
and spacer (K). (Spacer (K) is used only on code A
pumps. ) Remove setscrew (J). (Fulcrum lever used
in code C and D pumps is not equipped with setscrew
(J).)
Figure 3-67. Disassembling or assembling fulcrum lever assembly.
3-45
Back to Top
