TM-9-2910-226-34
PUMP, FUEL, METERING AND DISTRIBUTING, ASSEMBLY
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS
JUNE 1974
TM-9-2910-226-34 - Page 88 of 208
TM 9-2910-226-34
(11) Refer to figure 3-63. Remove fulcrum lever
and associated parts as an assembly from governor
housing.
Figure 3-63. Removing fulcrum lever and associated parts
(all pumps except code A).
NOTE
Paragraph (12), (13), (14) and (15) apply to
code A injection pumps only.
(12) Refer to figure 3-64. Remove operating
shaft bearing (A) from shaft (C). Remove and
discard gasket (B). Remove operating shaft spring
(E) and shaft spring plate (D).
3-42
Back to Top
