TM-9-2920-257-30-P
GENERATOR, ALTERNATING CURRENT, 200 AMPERES
TECHNICAL MANUAL; DIRECT SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS
MAY 1987
TM-9-2920-257-30-P - Page 60 of 111
TM 9-2920-257-30&P
b.
Generator Disassembly Procedure.
CAUTION
The generator weighs approximately 80 lb.
To prevent personal injury or damage
to the generator, get a helper when mounting the generator in the vise.
NOTE
Perform steps 1 through 4 only as required.
NOTE
Place soft-jaw caps on vise when holding generator pulley.
(1.)
Remove pulley nut (1) and hardened washer (2).
Do not loosen the fan nut at this time.
(2.)
Using a puller (item 7, App D), remove the pulley (3) from the core and shaft (4).
(3.)
Remove woodruff key (5) and bushing (6) from shaft.
3-30
Change 1
Back to Top
