MWO-5-2350-262-35-4
ARMORED COMBAT EARTHMOVER (ACE), M9
MODIFICATION WORK ORDER
MWO-5-2350-262-35-4 - Page 59 of 207
MWO 5--2350--262--35--4
3--30
SECTION II INSTALLATION OF HDC PRIMARY MANIFOLD ASSEMBLY,
MANUAL SHUT–OFF VALVE V23, AND LEFT MAIN MANIFOLD PRESSURE
TRANSDUCER T7 -- CONTINUED
3--4 MOUNTING AND INSTALLATION OF HDC PRIMARY MANIFOLD ASSEMBLY --
CONTINUED
NOTE
Step h below applies to Figure 3--16.
h.
Attach right support portion of outboard weldment bracket (1) to right side (vehicle left) of primary
manifold assembly (4) with two locking screws, B1821BH038C100L, (3) and two flat washers,
10910174--3, (2). Do not completely tighten screws at this time.
Figure 3--16. Attaching Outboard Weldment Bracket to Primary Manifold Assembly
Back to Top
