MWO-5-2350-262-35-4
ARMORED COMBAT EARTHMOVER (ACE), M9
MODIFICATION WORK ORDER
MWO-5-2350-262-35-4 - Page 63 of 207
MWO 5--2350--262--35--4
3--34
SECTION II INSTALLATION OF HDC PRIMARY MANIFOLD ASSEMBLY,
MANUAL SHUT–OFF VALVE V23, AND LEFT MAIN MANIFOLD PRESSURE
TRANSDUCER T7 -- CONTINUED
3--5 DIRECTIONAL CONTROL VALVE MODIFICATION -- INSTALLATION OF MANUAL
SHUT--OFF VALVE V23 -- CONTINUED
NOTE
Steps c through f below apply to Figure 3--20.
NOTE
No modification is required to manual ball valve V23. The ball valve functions in a right
hand configuration as supplied.
c.
Install 90
_
swivel adapter, 8AOEX6, (2) and o--ring, MS28778--8, (3) on top of manual ball valve,
BVHP--08--SSS--1NG, (4). This ball valve is functionally designated as V23.
d.
Install 90
_
adapter, MS51527A8, (7) and o--ring, MS28778--8, (6) on bottom of manual ball valve (4).
e.
Install manual ball valve (4) with attached 90
_
adapters (2 and 7) on DCV bank ejector valve port 22
(ejector retract) (1).
f.
Place “V23 EJECTOR” marker, 12496928--3, (5) on flat portion of manual ball valve (3).
Figure 3--20. Manual Shut--Off Ball Valve V23 Installation
Back to Top
