MWO-5-2350-262-35-4
ARMORED COMBAT EARTHMOVER (ACE), M9
MODIFICATION WORK ORDER
MWO-5-2350-262-35-4 - Page 70 of 207
MWO 5--2350--262--35--4
3--41
SECTION II INSTALLATION OF HDC PRIMARY MANIFOLD ASSEMBLY,
MANUAL SHUT–OFF VALVE V23, AND LEFT MAIN MANIFOLD PRESSURE
TRANSDUCER T7 -- CONTINUED
3--8
CONNECTION OF OTHER HYDRAULIC COMPONENTS TO HDC PRIMARY
MANIFOLD ASSEMBLY AND DCV BANK
NOTE
Step a below applies to Figure 3--26, and Table 3--1.
a.
Locate hydraulic hoses and tubes identified in Table 3--1, re--tag hoses as applicable, and connect to
HDC primary manifold assembly and DCV bank ports, as indicated.
NOTE
Due to limited space, it may be necessary to re--route some hoses to ensure proper
connection of hoses and tubes.
Figure 3--26. Installation of HDC Primary Manifold Assembly Hydraulic Tubes and Hoses
Back to Top
