MWO-5-2350-262-35-4
ARMORED COMBAT EARTHMOVER (ACE), M9
MODIFICATION WORK ORDER
MWO-5-2350-262-35-4 - Page 80 of 207
MWO 5--2350--262--35--4
3--51
SECTION II INSTALLATION OF HDC PRIMARY MANIFOLD ASSEMBLY,
MANUAL SHUT–OFF VALVE V23, AND LEFT MAIN MANIFOLD PRESSURE
TRANSDUCER T7 -- CONTINUED
3--8
CONNECTION OF OTHER HYDRAULIC COMPONENTS TO HDC PRIMARY
MANIFOLD ASSEMBLY AND DCV BANK -- CONTINUED
w.
Retag and install hydraulic hose, 13214E2457--24 (changed from 13214E2457--13), (7) between port 3R
(bottom) of primary manifold assembly and port 3R of left main manifold (top side).
x.
Retag and install hydraulic hose, 13214E2457--25 (changed from 13214E2457--14), (6) between port 3L
(bottom) of primary manifold assembly and port 3L of left main manifold (top side).
y.
Retag and install hydraulic hose, 13214E2478--3 (changed from 13214E2478--2), (8) between port C2
(bottom) of primary manifold assembly and port C2 on winch manifold (rear).
z.
Retag and install hydraulic hose, 13214E2473--3 (changed from 13214E2473--2), (3) between port 21
(bottom) of primary manifold assembly and base of ejector cylinder tube (line 21).
aa. Re--install any previously removed, unchanged, hydraulic hoses on DCV bank that have not been
re--installed.
NOTE
The interconnection of primary manifold assembly is not complete at this time. There are
additional hoses that are installed on primary manifold assembly when hydraulic filter
area of bowl is modified.
Figure 3--32. HDC Primary Manifold Assembly Hydraulic Interconnection
Back to Top
