TB-9-2350-277-40-P-4
CARRIER, COMMAND POST, FULL-TRACKED, ARMORED, M577A3; STANDARD INTEGRATED COMMAND POST SYSTEM (SICPS), M1068A3
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 4 OF 4
JUNE 2009
TB-9-2350-277-40-P-4 - Page 29 of 100
TB 9-2350-277-40&P-4
MODIFICATION PROCEDURES
0004 00
0004 00-1
THIS WORK PACKAGE COVERS:
Clearance for CREW II Primary Unit (page 0004 00-1).
Drill CREW II Cable Port (page 0004 00-3).
Drill CREW II Primary Unit Enclosure Mounting (page 0004 00-5).
Drill Intercom Unit Mounting (M1068A3 Only) (page 0004 00-6).
Drill CREW II Hull Roof RCU and GPS Cable Clamp (page 0004 00-7).
Drill CREW II Right Rail Support Bracket RCU and GPS Cable Clamps (page 0004 00-8).
INITIAL SETUP:
Maintenance Level
Sustainment
Tools and Special Tools
Cutoff Saw, Air Powered (WP 0011, Item 1)
Die and Tap Set, Thread Cutting (WP 0011 00, Item 2)
Drilling Machine, Upright (WP 0011 00, Item 3)
Drill Set, Twist (WP 0011 00, Item 4)
General Mechanic’s Tool Kit (WP 0011 00, Item 5)
Goggles, Industrial (WP 0011 00, Item 6)
Hole Saw Set, Carbide Tipped (WP 0011, Item 7)
Magnetic Drill Base Plate/Template (WP 0012 00)
Measuring Tape ( WP 0011 00, Item 8)
Portable Drill, Electric, 1/2 inch (WP 0011 00, Item 9)
Sander, Disk, Electric, Portable (WP 0011 00, Item 10)
Materials/Parts
Crew II Modification Kit (12498005)
Wheel, Cutoff (WP 0013 00, Item 3)
Personnel Required
Mechanic
References
TM 43-0139
Equipment Conditions
Carrier parked on level ground
Engine stopped (TM 9-2350-277-10)
Vehicle blocked (TM 9-2350-277-10)
CLEARANCE FOR CREW II PRIMARY UNIT
WARNING
Flammable or explosive compounds can ignite and seriously injure or
kill personnel.
Remove and stow all flammable and explosive
materials from vehicle and surrounding area.
CAUTION
Remove all equipment and gear from top right side rear area to
prevent damage when drilling holes in upper hull.
Back to Top
