TB-9-2350-277-40-P-4
CARRIER, COMMAND POST, FULL-TRACKED, ARMORED, M577A3; STANDARD INTEGRATED COMMAND POST SYSTEM (SICPS), M1068A3
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 4 OF 4
JUNE 2009
TB-9-2350-277-40-P-4 - Page 37 of 100
TB 9-2350-277-40&P-4
INSTALLATION PROCEDURES
0005 00
0005 00-1
THIS WORK PACKAGE COVERS:
Install GPS Kit (page 0005 00-1).
Install GPS Antenna Stowage Bracket (page 0005 00-8).
Install Cable Port and Primary Unit Enclosure (page 0005 00-9).
Install Intercom Unit/Mounting Bracket (M1068A3 Only) (page 0005 00-13).
Install RCU/PDA Bracket Assembly (M1068A3 Only) (page 0005 00-14).
Install RCU/PDA Bracket Assembly (M577A3 Only) (page 0005 00-16).
Install RCU Cable, GPS Cable, and Power Harness Clamps (page 0005 00-18).
Install RCU Cable, GPS Cable, Power Harness, and RCU to PDA Cable (page 0005 00-20).
INITIAL SETUP:
Maintenance Level
Sustainment
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0011 00, Item 5)
Measuring Tape (WP 0011 00, Item 8)
Sling , Endless (WP 0011 00, Item 11)
Wrench, Torque (WP 0011, Item 12)
Materials/Parts
Cleaning Compound (WP 0013 00, Item 1)
Crew II Modification Kit (12498005)
Personnel Required
Mechanic
Helper (H)
Equipment Conditions
Carrier parked on level ground
Engine stopped (TM 9-2350-277-10)
Vehicle blocked (TM 9-2350-277-10)
INSTALL GPS KIT
NOTE
If the carrier has a SINCGARS antenna mounted, do Steps 1 and 2.
If
carrier has no antenna, go to Step 3.
Back to Top
