TB-9-2350-277-40-P-4
CARRIER, COMMAND POST, FULL-TRACKED, ARMORED, M577A3; STANDARD INTEGRATED COMMAND POST SYSTEM (SICPS), M1068A3
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 4 OF 4
JUNE 2009
TB-9-2350-277-40-P-4 - Page 31 of 100
TB 9-2350-277-40&P-4
MODIFICATION PROCEDURES – Continued
0004 00
0004 00-3
DRILL CREW II CABLE PORT
1.
Locate and mark for center hole (4), measuring from right hull edge (5) 39-19/32 inches and 23-
3/4 inches from rear hull edge (3).
Figure 2.
Locate and Mark CREW II Cable Port
Back to Top
