TB-9-2350-277-40-P-4
CARRIER, COMMAND POST, FULL-TRACKED, ARMORED, M577A3; STANDARD INTEGRATED COMMAND POST SYSTEM (SICPS), M1068A3
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 4 OF 4
JUNE 2009
TB-9-2350-277-40-P-4 - Page 43 of 100
TB 9-2350-277-40&P-4
INSTALLATION PROCEDURES – Continued
0005 00
0005 00-7
8.
Install new gasket (15) on GPS mounting bracket (14).
NOTE
Remove and discard mounting plate provided in GPS mounting kit
(P/N 35095).
9.
Install antenna cover on vehicle.
NOTE
Antenna cover requires four screws (P/N B1821BH038C275N).
a.
Install antenna cover (10) over gasket (15), GPS mounting bracket (14), and antenna
opening.
Secure with four screws (19).
TORQUE SCREWS TO 44 LB-FT (59.6 N
·
m).
Figure 6.
Antenna Cover Installation
Back to Top
