TB-9-2350-277-40-P-4
CARRIER, COMMAND POST, FULL-TRACKED, ARMORED, M577A3; STANDARD INTEGRATED COMMAND POST SYSTEM (SICPS), M1068A3
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 4 OF 4
JUNE 2009
TB-9-2350-277-40-P-4 - Page 50 of 100
TB 9-2350-277-40&P-4
INSTALLATION PROCEDURES – Continued
0005 00
0005 00-14
INSTALL RCU/PDA BRACKET ASSEMBLY (M1068A3 ONLY)
1.
Install PDA cradle and RCU bracket to RCU/PDA bracket.
NOTE
A clamp is to be installed on the lower right stud of the PDA cradle.
Do not tighten hardware securing clamp until cable routing has been
completed.
a.
Install PDA cradle (48) and clamp (47) on RCU/PDA bracket (43).
Secure with four flat
washers (45) and self-locking nuts (46).
b.
Install RCU bracket (41) on RCU/PDA bracket (43).
Secure with four screws (42) and self-
locking nuts (44).
Figure 13.
RCU/PDA Bracket Assembly (M1068A3 Only)
Back to Top
