TB-9-2350-277-40-P-4
CARRIER, COMMAND POST, FULL-TRACKED, ARMORED, M577A3; STANDARD INTEGRATED COMMAND POST SYSTEM (SICPS), M1068A3
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 4 OF 4
JUNE 2009
TB-9-2350-277-40-P-4 - Page 54 of 100
TB 9-2350-277-40&P-4
INSTALLATION PROCEDURES – Continued
0005 00
0005 00-18
INSTALL RCU CABLE, GPS CABLE AND POWER HARNESS CLAMPS
NOTE
Do not tighten cable clamps until establishing the cable lengths
necessary to attach to their connecting components.
1.
Install clamp (61) to interior of hull roof.
Secure with screw (39) and lockwasher (62).
2.
Install three clamps (60) to right rail support brackets.
Secure with three screws (59), flat
washers (58), and self-locking nuts (57).
Figure 17.
RCU Cable, GPS Cable, and Power Harness Clamps Installation
Back to Top
