TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 519 of 704
0052-9
Change 1
TB 9-3950-253-13&P
0052
HEMTT STOWAGE ASSEMBLY INSTALLATION – CONTINUED
NOTE
•
Perform steps 13 through 16 for HEMTT M1120.
•
Perform steps 17 through 20 for HEMTT M1120A4.
•
Install hoses as tagged during removal.
•
Remove caps prior to installation of hoses.
13. Route four upper hoses (Figure 7, Item 2) in front of stowage assembly (Figure 7, Item 3) to hydraulic control
(Figure 7, Item 6).
14. Install four upper hoses (Figure 7, Item 2) on fittings (Figure 7, Item 1) on hydraulic control (Figure 7, Item 6).
15. Route four lower hoses (Figure 7, Item 4) under stowage assembly (Figure 7, Item 3) to hydraulic control
(Figure 7, Item 6).
16. Install four lower hoses (Figure 7, Item 4) on fittings (Figure 7, Item 5) on hydraulic control (Figure 7, Item 6).
Figure 7.
HEMTT M1120 Route and Install Hydraulic Hoses.
052
3
2
1
5
5
4
6
Back to Top
