TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

TB-9-3950-253-13-P - Page 524 of 704

TB 9-3950-253-13&P

Change 1

0052-14

0052

HEMTT STOWAGE ASSEMBLY INSTALLATION – CONTINUED

CAUTION

Use caution when handling sensor harness. Sensors are easily damaged if mishandled.

Failure to follow this caution may cause damage to equipment.

NOTE

Middle frame sensor harness and hook arm sensor harness are on right side of stowage

assembly.

37. Route middle frame sensor and hook arm sensor harnesses (Figure 12, Item 1) from stowage assembly

(Figure 12, Item 2), along inside of right side of frame (Figure 12, Item 4) to rear of main frame.

38. Install new tiedown straps (Figure 12, Item 3) as required to attach middle frame and hook arm sensor

harnesses (Figure 12, Item 1) to existing hoses along frame.

Figure 12.

Middle Frame and Hook Arm Harness Installation.

052

3

4

1

2