TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

TB-9-3950-253-13-P - Page 525 of 704

0052-15

Change 1

TB 9-3950-253-13&P

0052

HEMTT STOWAGE ASSEMBLY INSTALLATION – CONTINUED

CAUTION

Use caution when handling sensor harness. Sensors are easily damaged if mishandled.

Failure to follow this caution may cause damage to equipment.

NOTE

RH and LH twistlock sensor harness are on left side of stowage assembly.

39. Route RH and LH twistlock sensor harnesses (Figure 13, Item 1) from stowage assembly (Figure 13, Item 2),

along interior of left side of frame (Figure 13, Item 4) to rear of vehicle. Route each sensor harness to rear of

vehicle.

40. Install new tiedown straps (Figure 13, Item 3) as required to attach twistlock sensor harnesses (Figure 13,

Item 1) to existing hoses along frame (Figure 13, Item 4).

Figure 13.

Twistlock Sensor Harness Installation.

052

1

2

3

4