TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

TB-9-3950-253-13-P - Page 528 of 704

TB 9-3950-253-13&P

Change 1

0052-18

0052

HEMTT STOWAGE ASSEMBLY INSTALLATION – CONTINUED

48. Remove hose fitting (Figure 16, Item 3) from tank fitting (Figure 16, Item 4).

49. Apply thread tape on T-fitting (Figure 16, Item 5) and install T-fitting on tank fitting (Figure 16, Item 4).

50. Apply thread tape on hose fitting (Figure 16, Item 3) and install hose fitting on T-fitting (Figure 16, Item 5).

51. Cut air hose (Figure 16, Item 1) to fit and install on pneumatic fitting (Figure 16, Item 2).

Figure 16.

HEMTT M1120A4 Pneumatic Fitting and Hose Installation.

052

52. Move hook arm to stowed position (TM 9-2320-326-14&P).

NOTE

Rear edge of stowage assembly must be positioned 3 1/8 in. (80 mm) from front edge of

stowed hook arm. Measure distance on right and left sides of hook arm for accurate

placement of stowage assembly.

53. Adjust placement of stowage assembly (Figure 17, Item 1) on frame until distance between stowage assembly

and front edge of hook arm (Figure 17, Item 2) measures 3 1/8 in. (80 mm).