TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 522 of 704
TB 9-3950-253-13&P
Change 1
0052-12
0052
HEMTT STOWAGE ASSEMBLY INSTALLATION – CONTINUED
NOTE
•
Perform steps 23 through 29 for HEMTT M1120.
•
Perform steps 30 through 36 for HEMTT M1120A4.
23. Route pressure hose (Figure 10, Item 2) and relief hose (Figure 10, Item 3) to hydraulic control
(Figure 10, Item 1).
24. Install pressure hose (Figure 10, Item 2) from stowage assembly (Figure 10, Item 6) on T-fitting (Figure 10,
Item 10) on hydraulic control (Figure 10, Item 1).
25. Install relief hose (Figure 10, Item 3) from stowage assembly (Figure 10, Item 6) on T-fitting (Figure 10, Item 9)
on hydraulic control (Figure 10, Item 1).
26. Route male and female quick disconnect hoses (Figure 10, Item 7) from under stowage assembly (Figure 10,
Item 6) to hydraulic control (Figure 10, Item 1) and install on hydraulic control quick disconnect fittings
(Figure 10, Item 8).
NOTE
Stowage assembly wiring harness will not be installed at this time.
27. Route wiring harness (Figure 10, Item 4) to hydraulic control (Figure 10, Item 1) and install as marked during
removal.
28. Route wiring harness (Figure 10, Item 5) to hydraulic control (Figure 10, Item 1) and install as marked during
removal.
29. Verify that all loosened, repositioned, or installed hydraulic hoses and fittings are tightened and secure.
Figure 10.
HEMTT M1120 Install Hydraulic Hoses and Wiring Harnesses.
052
467-108
5
4
3
2
1
10
9
8
7
6
Back to Top
