TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

TB-9-3950-253-13-P - Page 534 of 704

TB 9-3950-253-13&P

Change 1

0052-24

0052

PLS STOWAGE ASSEMBLY INSTALLATION – CONTINUED

NOTE

•

Use original bolts and nuts for step 4.

•

The middle of the bolt holes should be approximately 2 3/8” off of the frame rail.

4. Install right-side stowage support bracket (Figure 22, Item 1), three bolts (Figure 22, Item 2), and nuts

(Figure 22, Item 3) on frame (Figure 22, Item 4).

NOTE

Use new bolts and original nuts for step 5.

5. Install two bolts (Figure 22, Item 5) and nuts (Figure 22, Item 6) on frame (Figure 22, Item 4).

NOTE

Use new bolts and nuts for step 6.

6. Install shims as necessary (Figure 22, Item 10), two bolts (Figure 22, Item 7), and nuts (Figure 22, Item 8) on

gas tank bracket (Figure 22, Item 9).

Figure 22.

PLS Right-Side Stowage Bracket Information.

052