TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

TB-9-3950-253-13-P - Page 541 of 704

0052-31

Change 1

TB 9-3950-253-13&P

0052

PLS STOWAGE ASSEMBLY INSTALLATION – CONTINUED

CAUTION

Use caution when handling sensor harness. Sensors are easily damaged if mishandled.

Failure to follow this caution may cause damage to equipment.

NOTE

Middle frame sensor harness and hook arm sensor harness are on right side of stowage

assembly.

19. Route middle frame sensor and hook arm sensor harnesses (Figure 29, Item 1) from stowage assembly

(Figure 29, Item 2), along inside of right side of frame (Figure 29, Item 4) to rear of main frame.

20. Install new tiedown straps (Figure 29, Item 3) as required to attach middle frame and hook arm sensor

harnesses (Figure 29, Item 1) to existing hoses along frame.

Figure 29.

Middle Frame and Hook Arm Harness Installation.

052

467-121

1

3

4

3

2