TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

TB-9-3950-253-13-P - Page 550 of 704

TB 9-3950-253-13&P

Change 1

0052-40

0052

HEMTT SLIDER ASSEMBLY INSTALLATION – CONTINUED

6. Use lifting device to place slider assembly (Figure 38, Item 1) on mounting blocks (Figure 38, Item 2), aligning

holes in slider assembly with rear holes in mounting block.

NOTE

Perform steps 7 through 10 for both right and left sides.

7. Apply thread adhesive to four bolts.

8. Install four washers (Figure 38, Item 4) and bolts (Figure 38, Item 5) in slider assembly (Figure 38, Item 1).

9. Remove lifting device and sling from slider assembly.

10. Tighten three bolts (Figure 38, Item 3) securing mounting blocks to frame, and four bolts (Figure 38, Item 5)

securing slider assembly to mounting blocks.

Figure 38.

HEMTT Slider Assembly Installation.

052

END OF TASK

467-112

1

4,5

2

3